259
Wi-Fi/NFC
Displaying pictures on a TV
1 Select the menu.
2 Select [Via Network] or [Direct], and connect. (P280)
3 Select a device you want to connect.
•
When the connection is established, the screen is displayed.
4 Take or play back pictures on this unit.
•
To change the setting or disconnect, press [Wi-Fi]. (P245)
• When a TV is connected to this unit, the TV screen may temporarily return to the status before
the connection. Pictures are displayed again when you take or play back pictures.
• [Effect] and [Sound] of the Slide Show are disabled.
Not available in these cases:
•
Motion pictures cannot be played back.
• During the multi/calendar playback, pictures displayed on the screen of this unit are not
displayed on TV.
You can display pictures on a TV that supports the
Digital Media Renderer (DMR) function of the DLNA
standard.
Preparations:
Set the TV to DLNA waiting mode.
• Read the operating instructions for your TV.
• For details on compatible devices, refer to the support sites below.
http://panasonic.jp/support/global/cs/dsc/
(This Site is English only.)
[Wi-Fi] > [New Connection]>[Playback on TV]
DMC-G6PDF-VQT4Z78_eng.book 259 ページ ２０１３年４月２５日 木曜日 午前１０時５分
To Next Page
Loading...
