98
Recording
In Program AE Mode, you can change the preset aperture value and shutter speed without
changing the exposure. This is called Program Shift.
You can make the background more blurred by decreasing the aperture value or record a
moving subject more dynamically by slowing the shutter speed when taking a picture in
Program AE Mode.
∫ Example of Program Shift
[When the interchangeable lens (H-PS14042) is used]
(A): Aperture value
(B): Shutter speed
1 Program Shift amount
2 Program Shift line chart
3 Program Shift limit
•
EV is an abbreviation of [Exposure Value].
The EV changes with the aperture value or the shutter speed.
• If the exposure is not adequate when the shutter button is pressed halfway, the aperture value
and shutter speed turn red and blink.
• Program Shift is canceled and the camera returns to normal Program AE Mode if more than
10 seconds pass after Program Shift is activated. However, the Program Shift setting is
memorized.
Not available in these cases:
•
Program Shift will only allow adjustments to be made when there is an adequate amount of
light.
• Program Shift is available in all [Sensitivity] settings except [ ].
Program Shift
(A)
(B)
4 2 1 1
/
2
1
/
4
1
/
8
1
/
15
1
/
30
1
/
60
1
/
125
1
/
250
1
/
500
1
/
1000
1
/
2000
1
/
4000
15
16
17
18
19
20
2
2.8
4
5.6
8
11
16
22
−1
0 1 2 3 4 5 6 7 8 9 10 11 12 13 14
（Ev）
DMC-G6PDF-VQT4Z78_eng.book 98 ページ ２０１３年４月２５日 木曜日 午前１０時５分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
