Panasonic Lumix DMC-G6 - Easily Optimizing the Brightness for a Specified Area (Touch AE)

151
Recording
Easily Optimizing the Brightness for a Specified
Area
(Touch AE)
Applicable modes:
You can easily optimize the brightness for a touched position. When the face of the subject
appears dark, you can brighten the screen according to the brightness of the face.
You can optimize just the brightness for a touched position by using a function button or
you can optimize both the focus and brightness for a touched position by optimizing the
brightness when using the Touch AF.
∫ Canceling the Touch AE function
Touch [ ].
•
[Metering Mode] returns to the original setting, and the brightness optimization position is
canceled.
Optimizing only the brightness for a touched position
1
Set a function button to [Touch AE]. (P52)
• The following step is an example in which [Touch AE] is assigned to [Fn6].
2
Touch [ ].
3
Touch [ ].
• The setting screen for the brightness optimization position
is displayed.
• [Metering Mode] is set to [ ], which is used exclusively
for the Touch AE.
4
Touch the subject you want to optimize the
brightness for.
• Touching [Reset] will bring the brightness optimization
position back to the center.
5
Touch [Set].
AE
66
AE
AE
Fn6
Fn7
ュリヴヱハ
6HW5HVHW
DMC-G6PDF-VQT4Z78_eng.book 151 ページ ２０１３年４月２５日 木曜日 午前１０時５分