152
Recording
Not available in these cases:
•
In the following cases, [Touch AE] cannot be used with a function button.
– When using the Digital Zoom.
– When [Touch AF] in [Touch Settings] of the [Custom] menu has been set to [AF+AE]. (P152)
1
Select [Touch Settings] in the [Custom] menu. (P43)
2
Select [Touch AF] and then touch [AF+AE].
3
Touch the subject you want to optimize the
brightness for.
• AF area setting screen is displayed. (P167)
• The brightness optimization position is displayed on the
center of the AF area. The position follows the movement
of the AF area.
• [Metering Mode] is set to [ ], which is used exclusively for the Touch AE.
• Touching [Reset] returns the brightness optimization position and the AF area to the
center.
4
Touch [Set].
• The AF area with the same function as [Ø] is displayed on the touched position.
• Touching [ ] returns [Metering Mode] to the original setting and cancels the
brightness optimization position. The AF area setting is also canceled.
• Touching [ ] returns [Metering Mode] to the original setting and cancels the
brightness optimization position.
Optimizing the focus and brightness for a touched position
When the background has become too bright, etc., the
brightness contrast with the background can be
adjusted by compensating the exposure.
DMC-G6PDF-VQT4Z78_eng.book 152 ページ ２０１３年４月２５日 木曜日 午前１０時５分
To Next Page
Loading...
