164
Recording
The camera automatically detects the person’s face. The focus
and exposure can then be adjusted to fit that face no matter
what portion of the picture it is in. (max. 15 areas)
When the camera detects a person’s face, the AF area is
displayed.
Yellow:
When the shutter button is pressed halfway, the frame turns
green when the camera is focused.
White:
Displayed when more than one face is detected. Other faces that are the same distance
away as faces within the yellow AF areas are also focused.
•
Position and size of the AF area can be changed. (P167)
• When [š] is selected and [Metering Mode] is set to multiple [ ], the camera will adjust the
exposure to suit the person’s face. (P190)
Not available in these cases:
•
Under certain picture-taking conditions including the following cases, the Face Detection
Function may fail to work, making it impossible to detect faces. The AF Mode is switched to
[].
– When the face is not facing the camera
– When the face is at an angle
– When the face is extremely bright or dark
– When the facial features are hidden behind sunglasses, etc.
– When the face appears small on the screen
– When there is little contrast on the faces
– When there is rapid movement
– When the subject is other than a human being
– When the camera is shaking
Type of the Auto Focus Mode
About [š] ([Face Detection])
DMC-G6PDF-VQT4Z78_eng.book 164 ページ ２０１３年４月２５日 木曜日 午前１０時５分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
