97
Recording
Displaying/not displaying the exposure meter
[MENU] > [Custom]>[Expo.Meter]>[ON]/[OFF]
•
Set to [ON] to display the [Expo.Meter] when correcting
exposure, performing Program Shift, setting aperture, and
setting shutter speed.
• Unsuitable areas of the range are displayed in red.
• When [Expo.Meter] is not displayed, switch the display information for screen by pressing
[DISP.]. (P72)
• The [Expo.Meter] disappears after approximately 4 seconds if no operation is performed.
98
98
16
0
SSS
F
250 15
4.0 5.6 8.0
3060125
+
50
603.5
DMC-G6PDF-VQT4Z78_eng.book 97 ページ ２０１３年４月２５日 木曜日 午前１０時５分
To Next Page
Loading...
