20
Before Use
Function lever can be used in 2 ways, for zoom operations
(P133) and for Exposure Compensation (P150).
Move the lever to left or right to operate.
To assign a function to the Function Lever
You can assign a function to the function lever. The default setting is [AUTO].
Function Lever
[MENU] > [Custom]>[Function Lever]
Item Description of settings
[AUTO]
When the lens is replaced, the camera automatically assigns the setting
suitable for the lens in use.
•
When using an interchangeable lens (H-PS14042) that supports the power
zoom (electrically operated zoom), the camera assigns the [ZOOM]
operation.
• When using an interchangeable lens (H-FS14140, H-FS1442A,
H-FS014042, H-FS45150) that does not support the power zoom, the
camera assigns the [EXP.] operation.
[ZOOM]
Zoom operations are operable.
[EXP.]
Exposure compensation is operable. (In the Manual Exposure Mode:
Aperture setting is operable.)
DMC-G6PDF-VQT4Z78_eng.book 20 ページ ２０１３年４月２５日 木曜日 午前１０時５分
To Next Page
Loading...
