241
Playback/Editing
∫ Canceling all the [Print Set] settings
Select the menu.
•
Confirmation screen is displayed. It is executed when [Yes] is selected.
Exit the menu after it is executed.
∫ To print the date
After setting the number of prints, set/cancel printing with the recording date by touching
[Date].
•
Depending on the photo printing store or the printer, the date may not be printed even if you set
to print the date. For further information, ask at your photo printing store or refer to the
operating instructions for the printer.
• The date print feature is disabled for pictures that are stamped with text.
• The number of prints can be set from 0 to 999.
• Depending on the printer, the date print settings of the printer may take precedence so check if
this is the case.
• It may not be possible to use the print settings with other equipment. In this case, cancel all the
settings, and reset the settings.
• When you set pictures in a group to [Print Set], the number of pictures added to [Print Set] and
the total number of pictures to be printed are displayed on the [Print Set] icon of the group’s top
picture.
Not available in these cases:
•
You cannot use [Print Set] for the following pictures.
– Motion pictures
– Pictures taken with [ ]
– File that does not comply with the DCF standard
[MENU] > [Playback]>[Print Set]>[Cancel]
DMC-G6PDF-VQT4Z78_eng.book 241 ページ ２０１３年４月２５日 木曜日 午前１０時５分
To Next Page
Loading...
Need help?
General
Weight and Dimensions
