26
Preparation
To attach the lens hood that came with the interchangeable lens (H-FS45150)
1 Align the fitting mark D on the lens hood with the mark on the tip of the lens.
2 Turn the lens hood in the direction of the arrow until it stops, and align the stop
mark E on the lens hood with the mark on the tip of the lens.
•
When carrying, the lens hood can be temporarily attached in the
reverse direction.
DMC-G6PDF-VQT4Z78_eng.book 26 ページ ２０１３年４月２５日 木曜日 午前１０時５分
To Next Page
Loading...
