Panasonic MINAS A6 Series - Compliance with the International Standards; List of Compatible Standards for the Servo Driver; European EU Directive; Compliance with the EMC Directive

No. SX-DSV03167 - 30 -
R6.0 Motion Control Business Unit, Panasonic Industry Co., Ltd.
9. Compliance with the international standards
9-1 List of compatible standards for the servo driver
Applicable standard
European EU
standard
EMC
EN 55011:2016/A1:2020 (Group 1, Class A)
EN 61000-6-2
EN 61000-6-4
EN 61800-3:2004/A1:2012 (Category C3, Second environment)
Low voltage EN 61800-5-1
UL standard
UL 61800-5-1 (File No. E164620)
Power conversion equipment - component
CSA standard C 22. 2 No. 274-13
KC
KN 11
KN 61000-4-2,3,4,5,6,8,11
EN : European Norman
EMC : Electromagnetic Compatibility
UL : Under writers Laboratoris
CSA : Canadian Standards Association
KC : Radio Waves Act(South Korea)
9-2 European EU directive
Our products comply with standards associated with the low voltage directive in order to facilitate compliance
of embedded equipment and devices with the EU directive.
9-2-1 Compliance with the EMC directive
EN 55011
Warning: Class A equipment is intended for use in an industrial environment. Conductive and radioactive
interference can make it difficult to ensure electromagnetic compatibility in other environments.
Caution: This equipment is not intended for use in residential environments and may not provide adequate
protection to radio reception in such environments.
EN 61800-3
Servo drivers and servo motors are not intended for general household use or for connection to low-voltage
public communication lines. Radio frequency interference may occur when connected to such circuits.
To comply with the EMC directive, use a noise filter, a surge absorber, and a ferrite core. The compliance
of machinery and equipment with the EMC Directive must be confirmed on machinery and equipment in its
final state incorporating servo drivers and servo motors.