(_ KEYSTONE button
(pages 28 and 29)
This button is used to correct
keystone distortion of the
projected image when the
projector position is tilted upward
or downward.
NORMAL button
(page 27)
This button is used to reset the
projector adjustment values to the
factory default settings.
@ ASPECT button
(page 30)
This button is used for aspect
adjustment (vertical and
horizontal proportions).
@MUTE button
(page 33)
This button momentarily stops
output of the projector's built-in
speaker.
@ LIGHT button
This button is used to illuminate
the buttons on the remote control
unit.
1(1(1(1(1(1(1(1(1(_FREEZE button
(page 27)
This button is used to
momentarily freeze projection so
that a still picture is displayed.
_MODE PICTURE button
(page 32)
This button is to display the
PICTURE MODE menu.
_MEMORY USER button
(page 36)
This button is to display the
MEMORY LOAD menu.
@VOLUME +/- buttons
These buttons are used to adjust
the volume of the sound output
from the projector's built-in
speaker.
_SD button
(page 43)
This button is to select the SD
CARD screen.
@SD MENU button
(page 43)
This button can be used to return
to a previous screen when SO
CARD screen is selected.
_SD TIME button
(page 49)
This button is used to display or
clear the playing time when a
moving picture stored on the SD
card is played back.
ENGLISH-15
To Next Page
Loading...
