Returning a setting to
the factory default
Ifyou press the NORMAL button on
the remote control unit, you can
return settings to the factory default
settings. However, the operation of
this function varies depending on
which screen is being displayed.
• When a menu screen is being
displayed
PICTURE
,i
CONTRAST 0 ===_
BRIGHT 0 =_
COLOUR 0
TINT 0
SHARPNESS 0 ==_
COLOUR TEMP. 4 0
GAMMA ADJUST
MEMORY SAVE
MEMORY LOAD
TV-SYSTEM _UTOI
SELECT 4mDJ _C
All items displayed will be returned
to their factory default settings, and
the bar scale will appear white.
• When an individual adjustment
screen is being displayed
JBRIGHT O _ I
Only the item displayed will be
returned to the factory default
setting, and the bar scale will
appear white.
NOTE:
• Triangle symbols above and
below a menu bar indicate the
factory default setting. Items
which do not have these triangle
symbols cannot be returned to
the factory default setting.
Indicates the standard factory
default setting
I m I
\ ,=
\
\
Indicates the current adjustment
value
• The positions of triangle symbols
vary depending on the type of
signal being input.
Using the freeze function
The picture will alternate between a still picture and a moving picture each
time the FREEZE button on the remote control unit is pressed.
Moving picture
ENGLISH-27
To Next Page
Loading...
