Projecting sRGB-
compatible pictures
sRGB is an international colour
reproduction standard (IEC61966-2-
1) established by the International
Electrotechnical Commission (IEC).
If you would like the colours in
sRGB-compatible pictures to be
reproduced more faithfully, make
the following settings.
(_ Press the • or • button to
select "PICTURE MODE", and
then use the • or • button to
select "NATURAL".
(_ Press the NORMAL button on
the remote control unit.
(_Select the LAMP POWER item
in the OPTION menu by
pressing the • or • buttons
and set to "HIGH" by pressing
the • or • buttons.
NOTE:
• sRGB is only enabled when RGB
signals are being input.
ENGLISH-37
To Next Page
Loading...
