Error displays
Errors may be displayed while using an SD memory card. If an error occurs,
check the following table for a description of the error.
Error display Details
NO CARD • There is no SD memory card inserted.
NO DATA • The SD memory card does not contain any data that
can be played back by the projector.
UNFORMAT • The inserted card does not match the required
specifications, for example the format is different.
DATA ERROR • The data is not compatible and cannot be played
back.
READ ERROR • The data cannot be read from the card.
WRITE ERROR • The data could not be saved onto the card. Check if
the SD memory card is write-protected, or if it has
enough free space available.
ERROR • If "ERROR" is displayed instead of a thumbnail
image, it means that the image cannot be displayed
because there is no data or the data is incompatible.
? • If "?" is displayed instead of a thumbnail image, it
means that only the thumbnail data cannot be found.
UNEXPECTED • An error occurred during an operation. If the problem
ERROR cannot be reset by pressing the SD MENU button,
turn off the projector's power while referring to
"Turning off the power" on page 23, and then turn the
power back on again.
NOTE:
• Press the SD MENU button to clear an error display.
• A 2-digit error code will be displayed with an error display. You might need
the error code when asking for service.
50-ENGL/SH
To Next Page
Loading...
