Using the shutter function
The shutter function can be used to momentarily turn off the picture and
sound from the projector when the projector is not being used for short
periods of time, such as during breaks in meetings or when carrying out
preparation. The projector uses less power in shutter mode than it does in
normal projection mode.
_Select SHUTTER from the MAIN MENU screen and then press the
ENTER button.
Press any button on either the projector or remote control unit to
return to normal operating mode.
Changing the display language
_SelectLANGUAGEfromthe MAIN MENU scmenandthenpressthe
ENTER button.
_Usethe • or • buttonstosele_ alanguageandthen p_ssthe
ENTER button.
LANGUAGE ENGLISH
m.....
DEUTSGH
FRAN_AIS
ESPA_OL
ITALIANO
B$I
mX
€ SELEOTm_ENTER _ESC
Indicates the language which is
currently set
Muting the sound
The sound can be muted for temporary interruptions such as telephone calls.
Press the MUTE button once to turn off sound, and press MUTE again to
regain sound.
rlUTE
NOTE:
• If the power is turned off or the VOLUME +/- buttons are pressed, the
mute wilt be canceled.
ENGLISH-33
To Next Page
Loading...
