Panasonic PT-AE200E

ASPECT
Refer page 30.
AUTO SETUP
(PC only)
HORIZONTAL POSITION,
VERTICAL POSITION, DOT
CLOCK and CLOCK PHASE are
matched to the input signal and are
automatically adjusted.
NOTE:
• When the ASPECT is set to V-
SCROLL (page 30), AUTO
SETUP cannot be oerformed.
Option settings
Use the • and • buttons to select
an item, then press the < or I_
buttons to change the setting.
OPTION
NR 4 ON
PC PRIORITY _ORMAL
BACK COLOGR 4BLACK
4CENTRE
_FRONT
D_SK/CEILING _ DESK
FAN CONTROL _ORMAL
LAMP POWER _ HIGH
LAMP RUNTIME SH
€ SELECT4_na [me
OSD
IOSD
14 OFF
ON The signal name is
displayed in the top-right
corner of the screen when
the input signal is
changed.
OFF Use this setting when you
do not want the signal
name to be displayed.
NR (Noise Reduction)
(S-VIDEO/VIDEO/YPBPR/AV 1 only)
INr_ 4 oN )If-=
l
It OFF I
If noise occurs from the projector
because of a poor input signal, set
NR to "ON".
To turn off the NR (Noise
Reduction) feature, set it to "OFF".
PC PRIORITY
(PC only)
,PO PRIORITY 14' NORrlALwIoE$ :_
NORMAL displays the PC screen
data in a 4:3 aspect ratio.
WIDE displays the PC screen data
in a 16:9 aspect ratio.
BACK COLOUR
IBACK COLOUR IBLACK )'l_l
€
J
I1 BLUE _1
This sets the colour which is
projected onto the screen when no
signal is being input to the projector.
This sets the background colour for
the left/right margins when the 4:3
aspect ratio is selected. (Refer to
page 31 .)
ENGLISH-39