Example of connecting to computer
To audio
output
Computer Computer
I i I
To DVI-D To audio
output output
i
I
I
To RGB
output
*This illustration is an example of
connection for the PT-AE300E.
NOTE:
• It is better to shut down the computer before turning off the MAIN POWER
switch of the projector.
• Refer to the list of compatible signals on page 61 for the types of RGB
signals which can be input to the projector by connecting a computer.
• Only one audio system circuit is available for the AUDIO IN L-R jacks, so if
you wish to change the audio input source, you will need to remove and
insert the appropriate plugs.
• The PT-AE200E does not have a DVI-D input (DVI-D IN) connector.
20-ENGLISH
To Next Page
Loading...
