Chapter 4 Settings — [SIGNAL LIST] menu
The projector has a sub memory function that can register the multiple image adjustment data, even if it is recognized as the same signal by
the frequency or format of the synchronization signal source.
synchronization signal source. The sub memory includes all the data that can be adjusted for each signal, such as the screen aspect ratio and
1) Press as on the normal screen (when the menu is not displayed).
f 3).
f
f →
control can be used instead of qw.
Press asqw
3)
f The [SIGNAL NAME CHANGE] screen is displayed.
4) Press asqw
f 6) and 7) in x page 101).
1) Press as on the normal screen (when the menu is not displayed).
f
Press asqw to select the signal to switch in [SUB MEMORY LIST].
3)
f .
1) Press as on the normal screen (when the menu is not displayed).
f The [SUB MEMORY LIST] screen is displayed.
Press asqw
control.
f The [REGISTERED SIGNAL DELETE] screen is displayed.
f [SUB MEMORY LIST] screen.
3)
f The selected sub memory will be deleted.
To Next Page
