Chapter 4 Settings — [PROJECTOR SETUP] menu
[ECO MANAGEMENT]
This function optimizes lamp power according to the operating status to reduce power consumption.
Setting [LAMP POWER]
1) Press as to select [ECO MANAGEMENT].
f The [ECO MANAGEMENT] screen is displayed.
3) Press as to select [LAMP POWER].
4) Press qw to switch the item.
[AUTO]
Power is automatically adjusted so that optimum luminance is obtained according to the brightness of
input signals.
[NORMAL]
[ECO]
Note
f
f
f When x page 62)
Setting [AUTO POWER SAVE]
*1
,
*2
.
1) Press as to select [ECO MANAGEMENT].
f The [ECO MANAGEMENT] screen is displayed.
3) Press as to select [AUTO POWER SAVE].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
Enables the energy conservation setting.
[OFF]
Press as
*1
[AV MUTE DETECTION]
*2.
.
[AMBIENT LIGHT
DETECTION]
[SIGNAL DETECTION]
Lowers the power of the lamp when there is no signal.
[SHUTTER DETECTION]
*1
Lowers the power of the lamp when the shutter is closed.
[AV MUTE DETECTION]
*2
*1
*2
6) Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
Enables the setting.
[OFF]
Note
f
*1
are unavailable.
f
properly.
To Next Page
Loading...
