Chapter 4 Settings — [PROJECTOR SETUP] menu
[OFF]
[ON]
Setting audio input from a connected device
1) Press as to select [AUDIO SETTING].
f The [AUDIO SETTING] screen is displayed.
3) Press as to select the audio input.
4) Press qw to switch the item.
f The items will switch each time you press the button.
[AUDIO IN 1]
terminal.
terminal.
[AUDIO IN 3]
terminal.
[HDMI AUDIO IN]
*1
[DIGITAL LINK AUDIO IN]
[DisplayPort AUDIO IN]
*3
*1
*2
*3
[STATUS]
1) Press as to select [STATUS].
f The [STATUS] screen is displayed.
3) Press qw to switch the pages.
f The page will change each time you press the button.
[INPUT]
[SIGNAL NAME]
[SIGNAL FREQUENCY]
[PROJECTOR RUNTIME]
[LAMP : ECO]
[LAMP : NORMAL]
[LAMP : TOTAL]
*1
converted runtime.
[INTAKE AIR TEMP.]
[AROUND LAMP TEMP.]
[PROJECTOR TYPE]
[SERIAL NUMBER]
[LAMP UNIT MODEL NO.]
[LAMP SERIAL NUMBER]
[MAIN VERSION]
[SUB VERSION]
[NETWORK VERSION]
[EMULATE]
[ON COUNT]
[POWER ON TIMES]
[LAMP ON]
[SHUTTER]
To Next Page
