Chapter 4 Settings — [PROJECTOR SETUP] menu
*3
11)
f n is displayed at the left of the selected command.
f
Press asqw
Note
f
f
6)
f
number.
f The operating time will be the local time. (x
f
[STARTUP INPUT SELECT]
1) Press as to select [STARTUP INPUT SELECT].
f The [STARTUP INPUT SELECT] screen is displayed.
3) Press asqw to select an input.
f The items will switch each time you press the button.
[LAST USED]
[VIDEO]
[RGB1]
[DVI-D]
[HDMI]
[DIGITAL LINK]
*1
[DisplayPort]
*1
[INPUT1] - [INPUT10]
*1
*2
4)
Setting the communication condition of the <SERIAL IN> terminal
1) Press as
f The screen is displayed.
3) Press as to select [INPUT SELECT].
f
4) Press qw to switch the item.
To Next Page
Loading...
