Chapter 4 Settings — [PICTURE] menu
3) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
[DAYLIGHT VIEW]
You can correct the image to the optimal vividness even if it is projected under a bright light.
1) Press as to select [DAYLIGHT VIEW].
Press qw
f The [DAYLIGHT VIEW] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
The brightness of the room is detected by the luminance sensor, and the vividness of the image is
automatically corrected.
[OFF]
[1]
[3]
Note
f When x page 86)
f
[SYSTEM SELECTOR]
system method matching the input signal.
1) Press as to select [SYSTEM SELECTOR].
3) Press as to select a system format.
f
Terminal System format
<VIDEO/G/Y>/<B/P
B
/C>
terminals
IN> terminal
B
R
VGA60 or 480p signal
B
R
B
P
R
<DVI-D IN> terminal
signal
B
R
B
P
R
LINK/LAN>
*1
<DisplayPort IN>
terminal
signal
B
R
B
P
R
*1
*2
4)
Note
f Refer to x page 146) for the types of video signals that can be used with the projector.
f
To Next Page
