Chapter 4 Settings — [PROJECTOR SETUP] menu
[PROJECTOR SETUP] menu
Refer to x for the operation of the menu screen.
f asqw to set.
[PROJECTOR ID]
control or individual control via a single remote control.
1) Press as to select [PROJECTOR ID].
Press qw to switch the item.
f The items will switch each time you press the button.
[ALL]
[1] - [64]
Note
f
f
control.
numbers.
f Refer to x page 27)
[PROJECTION METHOD]
1) Press as to select [PROJECTION METHOD].
f The [PROJECTION METHOD] screen is displayed.
3) Press as to select the projection method.
[FRONT/FLOOR]
When installing the projector on the desk, etc., in front of the screen
[FRONT/CEILING]
[REAR/FLOOR]
When installing the projector on the desk, etc., behind the screen (with a translucent screen)
[REAR/CEILING]
Bracket (optional)
4)
Note
f as on the control panel is reversed.
To Next Page
Loading...
