Chapter 4 Settings — [POSITION] menu
When [ASPECT] is set to [NORMAL]
1) Press as to select [ZOOM].
f The [ZOOM] screen is displayed.
3) Press as to select [MODE].
4) Press qw to switch the item.
[INTERNAL]
[FULL]
Press as to select [INTERLOCKED].
6) Press qw to switch the item.
[OFF]
[ON]
7) Press as to select [VERTICAL] or [HORIZONTAL].
f
8) Press qw to adjust.
Note
f
[CLOCK PHASE]
1) Press as to select [CLOCK PHASE].
Press qw
f The [CLOCK PHASE] individual adjustment screen is displayed.
3) Press qw to adjust.
f
Note
f
f
f
f
f
f wq
[KEYSTONE]
You can correct the keystone distortion that occurs when the projector is installed tilted or when the screen is tilted.
Setting [KEYSTONE]
1) Press as to select [KEYSTONE].
3) Press as to select [KEYSTONE].
4)
f The [KEYSTONE] individual adjustment screen is displayed.
Press asqw to adjust.
To Next Page
Loading...
