Chapter 4 Settings — [PICTURE] menu
Note
f
[GAMMA]
You can adjust contrast balance.
1) Press as to select [GAMMA].
Press qw
f The [GAMMA] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation Adjustment Range of adjustment
Press w.
The midtones become brighter.
-
Press q.
The midtones become darker.
[SHARPNESS]
You can adjust the sharpness of the projected image.
1) Press as to select [SHARPNESS].
Press qw
f The [SHARPNESS] individual adjustment screen is displayed.
3) Press qw to adjust the level.
Operation Adjustment Range of adjustment
Press the w button.
Press the q button.
Note
f wq
[NOISE REDUCTION]
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1) Press as to select [NOISE REDUCTION].
Press qw
f The [NOISE REDUCTION] individual adjustment screen is displayed.
3) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[1]
[3]
Attention
f
[IRIS]
1) Press as to select [IRIS].
Press qw
f The [IRIS] individual adjustment screen is displayed.
To Next Page
Loading...
