Chapter 4 Settings — [PROJECTOR SETUP] menu
f The [DATE AND TIME] screen is displayed.
3) Press as to select [ADJUST CLOCK].
4)
f The [ADJUST CLOCK] screen is displayed.
Press asqw to change the setting to [ON].
6) Press as
f The setting of the date and time will be completed.
Note
f To set the date and time automatically, the projector must be connected to the network.
f
f x page 117) for details.
[SAVE ALL USER DATA]
1) Press as to select [SAVE ALL USER DATA].
f The [SECURITY PASSWORD] screen is displayed.
3)
4) qw
f
Note
f
[LOAD ALL USER DATA]
Load the various setting values saved as a backup in the built-in memory of the projector.
1) Press as to select [LOAD ALL USER DATA].
f The [SECURITY PASSWORD] screen is displayed.
3)
4) qw
Note
f
f
[INITIALIZE]
Return various setting values to their factory default settings.
1) Press as to select [INITIALIZE].
f The [SECURITY PASSWORD] screen is displayed.
3)
f The [INITIALIZE] screen is displayed.
4) Press as to select an item to initialize.
[ALL USER DATA]
To Next Page
Loading...
