Chapter 4 Settings — [PROJECTOR SETUP] menu
[PROJECTOR]
Press as to select [BAUDRATE].
6) Press qw to switch the item.
f The items will switch each time you press the button.
[9600]
[38400]
7) Press as to select [PARITY].
8) Press qw to switch the item.
f The items will switch each time you press the button.
[NONE]
[EVEN]
[ODD]
Setting the control commands of an existing projector
When controlling the projector on a computer, set use of control commands on a previously purchased Panasonic projector. This allows the
1) Press as
f The screen is displayed.
3) Press as to select [EMULATE].
4)
Press as to select an item.
[DEFAULT]
[D4000]
[D/W/Z6k SERIES]
[L730 SERIES]
[L780 SERIES]
[F/W SERIES]
[LZ370]
[LB/W SERIES]
[VW431D]
6)
7) qw
To Next Page
Loading...
