Chapter 4 Settings — [PROJECTOR SETUP] menu
Press qw
f The [SCHEDULE] screen is displayed.
3) Select and assign program to each day of week.
f Press as to select the day of week, and press qw to select a program number.
f
How to set a program
1) Press as to select [SCHEDULE].
Press qw
f The [SCHEDULE] screen is displayed.
3) Press as to select [PROGRAM EDIT].
4) Press qw
Press as
f You can change the page using qw.
6) Press asqw
7) Press qwas
8) Press asqw to select [COMMAND].
9)
f The [COMMAND] detailed screen is displayed.
10) Press as to select a [COMMAND].
f qw.
f asqw to select the input to set.
[COMMAND]
Detailed settings of
[COMMAND]
Description
[POWER ON]
[STANDBY]
Enters standby.
[SHUTTER]
*1
[OPEN]
[CLOSE]
[INPUT]
[VIDEO]
[RGB1]
[DVI-D]
[HDMI]
[DIGITAL LINK]
[DisplayPort]
[INPUT1] - [INPUT10]
[LAMP POWER]
[AUTO]
[NORMAL]
[ECO]
[P IN P]
[OFF]
[USER1]
[USER3]
[IN STANDBY MODE(AUDIO)]
[OFF]
[ON]
[VOLUME] [0] - [63]
*1
*2
To Next Page
Loading...
