Chapter 1 Preparation — Precautions for use
rProjection Lens
on the lens.
rFocus adjustment
The projection lens is thermally affected by the light from the light source, making the focus unstable in the period just after
switching on the power. Before adjusting the lens focus, wait at least 30 minutes with the image projected.
r
rDo not use the projector tilted to the right or left.
rCautions when setting up the projector
f
Prevent a gap forming between the setting surface and the screw holes for ceiling mount on the projector bottom, for
Screw holes for ceiling mount (M6)
Adjustable feet
The positions of screw holes for ceiling mount and adjustable feet
f
damage the projector.
f
f
f
f
To Next Page
Loading...
