Panasonic PT-FRZ50

Chapter 4 Settings — [NETWORK] menu
ENGLISH - 123
[DHCP]
Displays the status of use of the DHCP server.
[IP ADDRESS]
Displays the [IP ADDRESS].
[SUBNET MASK]
Displays the [SUBNET MASK].
[DEFAULT GATEWAY]
Displays the [DEFAULT GATEWAY].
[DNS1]
Displays the address of the preferred DNS server.
[DNS2]
Displays the address of the alternate DNS server.
[MAC ADDRESS]
Displays the [MAC ADDRESS].
Note
f
The network setting is common for the <LAN> terminal and the <DIGITAL LINK/LAN> terminal.
[ADMINISTRATOR ACCOUNT]
Set the user name and password of the administrator account.
[PASSWORD POLICY]
Display the policies about the password for the administrator account.
1) Press
as
to select [ADMINISTRATOR ACCOUNT].
2) Press the <ENTER> button.
f
The
[ADMINISTRATOR ACCOUNT]
screen is displayed.
3) Press
as
to select [PASSWORD POLICY], and press the <ENTER> button.
f
The
[PASSWORD POLICY]
screen is displayed.
PASSWORD POLICY
RETURN
MENU
Reusing passwords is not recommended.
Password cannot be blank.
A password consisting of at least eight
half-width characters and contaning
characters of at least three of the
following four types is recommended.
Uppercase letters
Lowercase letters
Digits
Symbols(~!@#$%^&*()_+\|}{][<>.,/?)
Setting the administrator account for the rst time
Set the user name and password of the administrator account.
1) Press
as
to select [ADMINISTRATOR ACCOUNT].
2) Press the <ENTER> button.
f
The
[ADMINISTRATOR ACCOUNT]
screen is displayed.
3) Press
as
to select [USER NAME], and press the <ENTER> button.
f
The
[USER NAME]
screen is displayed.
f
The factory default setting of user name is "dispadmin".
4) Press
asqw
to select a character, and press the <ENTER> button.
f
Up to 16 characters can be entered.
5) After entering the user name, press
asqw
to select [OK], and press the <ENTER> button.
f
The
[ADMINISTRATOR ACCOUNT]
screen is displayed.
6) Press
as
to select [PASSWORD], and press the <ENTER> button.
f
The
[PASSWORD]
screen is displayed.
7) Press
asqw
to select a character, and press the <ENTER> button.
f
Up to 16 characters can be entered.