EasyManua.ls Logo

Panasonic PT-FRZ50

Panasonic PT-FRZ50
186 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 5 Operations — Updating the rmware
152 - ENGLISH
Updating the rmware
The rmware of the projector can be updated via LAN.
Check the Panasonic website (https://panasonic.net/cns/projector/pass/) for availability of the rmware that can be
updated. Customer can update the rmware if a newer version than the current rmware version is published.
It is necessary to register and log in to PASS
*1
to conrm the availability of the rmware that can be updated or to
download the rmware.
*1 PASS: Panasonic Professional Display and Projector Technical Support Website
For details, visit the Panasonic website (https://panasonic.net/cns/projector/pass/).
r
Firmware that can be updated
Main version
r
How to conrm the rmware version
Current rmware version can be conrmed by pressing the <STATUS> button on the remote control and displaying
the
[STATUS]
screen.
The rmware version can also be conrmed in the [PROJECTOR SETUP] menu → [STATUS].
SW1234567
10h
2h
1/3
1h 23min
1.00 / 1.00
31°C/87°F
31°C/87°F
31°C/87°F
27°C/80°F
31°C/87°F
EXITCHANGE
SEND E-MAIL
SELF TEST
LIGHT TEMP. 2
NO ERRORS
LIGHT TEMP. 1
EXHAUST AIR TEMP.
OPTICS MODULE TEMP.
INTAKE AIR TEMP.
MAIN/SUB VERSION
CONTINUOUS LIGHTING TIME
LIGHT RUNTIME
PROJECTOR RUNTIME
SERIAL NUMBER
PROJECTOR TYPE
STATUS
PT-FRZ50
ENTER
MENU
Main version
Note
f
A LAN cable is required to connect to the network via wired LAN.
Updating the rmware via LAN
Example of network connection
In case of connecton with switching hub
In case of direct connection
LAN cable (straight)
LAN cable (straight)
LAN cable (straight)
<LAN> terminal
Computer
Computer
Switching hub
Attention
f
When a LAN cable is directly connected to the projector, the network connection must be made indoors.
Note
f
A LAN cable is required to connect to the network via wired LAN.
f
Connect a LAN cable to the <LAN> terminal or the <DIGITAL LINK/LAN> terminal of the projector.
f
To connect to the network using the <LAN> terminal, set the [NETWORK] menu → [ETHERNET TYPE] to [LAN] or [LAN & DIGITAL LINK].

Table of Contents

Related product manuals