Panasonic PT-FRZ50 - Using Art-Net Function

Chapter 7 Appendix — Technical information
ENGLISH - 167
Class Command Control details
Parameter/
response string
Remark
1 INF0?
Other information
queries
xxxxx Returns the main version of the rmware.
1 CLSS? Class information query 2 Returns class for PJLink.
2 SNUM ? Serial number query xxxxxxxxx Returns serial number.
2 SVER ? Software version query xxxxxxxxx Returns version number.
2 INNM?
Input terminal name
query
11 / COMPUTER1
Returns input terminal name.
12 / COMPUTER2
21 / VIDEO
32 / HDMI1
33 / DIGITAL LINK
36 / HDMI2
2 IRES ?
Input signal resolution
query
AAAAxBBBB
AAAA: Horizontal resolution
BBBB: Vertical resolution
2 RRES ?
Recommended
resolution query
1920 x 1200 Returns display resolution.
2
FREZ Freeze control 0 Freeze clear
FREZ ? Freeze status query 1 Freeze (stop)
2 POWR
Cooling notication 0 Noties when the power is turned o󰀨.
Warmup notication 1 Noties when the power is turned on.
2 ERST Error notication xxxxxx Noties when an error occurs.
2 LKUP Link up notication xx:xx:xx:xx:xx:xx
Noties the MAC address when the PJLink communication becomes
possible.
2 INPT
Input switch completion
notication
11
COMPUTER1
12
COMPUTER2
21
VIDEO
32
HDMI1
33
DIGITAL LINK
36
HDMI2
2 SRCH Projector search
ACKN=xx:xx:xx:xx:xx:xx
The projector connected to the same network that can communicate
with PJLink will respond with its MAC address.
PJLink security authentication
A PJLink password for security authentication is required for PJLink command communication.
The PJLink password can be set from the [NETWORK] menu
→
[PJLink]
→
[PJLink PASSWORD] (
x
page 126)
or from the [Set up password] page (
x
page 146) of the web control screen.
When using the PJLink commands without security authentication, set the PJLink password to blank. The factory
default setting of PJLink password is blank.
f
For specications related to PJLink, visit the website of Japan Business Machine and Information System
Industries Association.
URL http://pjlink.jbmia.or.jp/english/
Using Art-Net function
Since the network function of the projector supports the Art-Net function, you can control the projector settings
with the DMX controller and application software using the Art-Net protocol.
Note
f
Setting the password of the administrator account (
x
page 123) is required for using the Art-Net function of the projector.
Channel denition
The following table lists the channel denitions used for controlling the projector with the Art-Net function.
Channel settings can be switched using the [NETWORK] menu
→
[Art-Net]
→
[Art-Net CHANNEL SETTING]
(
x
page 128).
The control details assigned to each channel are listed in the following table.
f
Channel assignment for [USER] is in factory default setting. Assignment can be changed.