Panasonic PT-FRZ50

Chapter 3 Basic Operations — Operating with the remote control
52 - ENGLISH
Adjusting the volume
Adjust the volume of audio output.
button
1) Press the <VOL - > button/<VOL+> button on the remote control.
<VOL+>
Increases the volume.
<VOL - >
Decreases the volume.
Note
f
This operation can be also performed using
qw
on the control panel.
Using the freeze function
The projected image can be paused and audio can be turned o󰀨 regardless of the playback of the external device.
button
1) Press the <FREEZE> button.
f
The image freezes and audio is muted.
2) Press the <FREEZE> button again.
f
Freezing of the image is canceled and audio is turned on.
Note
f
[FREEZE] is displayed on the screen when video is paused.
f
When freezing of the moving image is canceled, the image may disappear or be disrupted temporarily.
Using the on-screen display function
Turn o󰀨 the on-screen display function (no display) when you do not wish the viewers to see the on-screen display,
such as the menu or the input terminal name.
button
1) Press the <ON SCREEN> button.
f
The on-screen display disappears.
2) Press the <ON SCREEN> button again.
f
The on-screen display appears.
Note
f
If you press the <MENU> button on the control panel for at least three seconds while the on-screen display is o󰀨 (hidden), the on-screen
display is turned on.