Panasonic PT-VMZ50

4) Click OK.
f The [Change password] page is displayed.
For user rights For administrator rights
5) Enter the new user name and password, and click [Change].
f The screen in Step 3) is displayed again.
6) Enter the new user name and password.
f Enter the new user name and password set in Step 5).
7) Click OK.
Attention
f The entry screen for the user name and password may be hidden by other window that is already opened. In such case, minimize the
window in front to display the entry screen.
Note
f If you use a web browser to control the projector, set [NETWORK CONTROL] in the [NETWORK] menu to [ON] (x page 97).
f Do not perform setting or control simultaneously by starting up multiple web browsers. Do not set or control the projector from multiple
computers.
f Access will be locked for few minutes when an incorrect password is entered three times consecutively.
f Some items on the projector setting page use the Javascript function of the web browser. The projector may not be able to be controlled
properly if it is set with a browser that does not have this function enabled.
f If the screen for the web control is not displayed, consult your network administrator.
f While updating the screen for the web control, the screen may become white for a moment, but it is not a malfunction.
f When the projector is already registered in the application software of “Multi Monitoring & Control Software” that uses the communication
control via LAN, communication with the projector will become impossible if a user name or password for [Administrator] is changed. If a
user name or password for [Administrator] is changed, update the registration information of the application software in use.
f About computer screen illustrations
The screen size and the display may differ from this manual depending on the OS, web browser or the type of computer you are using.
Available functions per account
With the administrator rights, all functions can be used. With the user rights, available functions are restricted.
Select an account according to the purpose of use.
l: The operation can be performed.
―: The operation cannot be performed.
Item Function
Administrator
rights
User rights Page
[Status]
[Projector status]
l l
111
Error information page
l l
112
[Network status]
l l
112
[Projector control]
[Basic control]
l l
113
[Detail control]
l l
113
[Detailed set up]
[Network cong]
l
―
113
[Ping test]
l
―
115
[ECO management set up]
l
―
115
[E-mail set up]
l
―
116
[Authentication set up]
l
―
117
[Port set up]
l
―
119
110 - ENGLISH
Chapter 5 Operation of Function - Web control function