Panasonic S-22KA1E5 - Page 136

136
Example of embedding into the wall
Remove the decorative panel for the receiver and secure the outlet box with 2 screws so it is embedded.
Control box cove
r
Control cable
Control box
Screw
Remove the control box cover by removing the screws and connect the joint cord for wiring to the P.C.B connector
<CN-DISP> in the control box.
Connect joint cord for wiring to the P.C.B
connector <CN-DISP> in the control box of
the indoor unit.
Secure and clamp the
joint cord together with
the other cable.
Core