Panasonic S-22KA1E5 - Wireless Remote Control Local Setting Mode

238
17.6 Wireless Remote Control Local Setting Mode
• Press the SET button (2) to enter Local Setting
Mode
• Press Temperature Up / Down button to select
Mode No.
• Press Timer Up / Down button to select setting
value.
• Press Timer SET button (1) to confirm the selection.
• Setting display for 4 seconds, exits from LOCAL
SETTING MODE. If no operation is performed for
30 seconds, exit LOCAL SETTING MODE.
Mode
No.
Items Setting value
Individual
Setting
Note 1)
00 Centralized control address 000 – 200: Address 0 – Address 200

01 Fan speed up 000: OFF 001: ON
000: Execute Reset
(Level 0)
Nighttime low noise
001 – 003: Level 1 – Level 3
Nighttime low noise ON time 0:00 23.50 (10 minutes interval)
02
Nighttime low noise OFF time 0:00 23.50 (10 minutes interval)
000: Default control
001: 10 seconds fan sampling operation
03
Thermostat OFF
indoor fan control
002: Fixed fan speed operation

000: default Thermostat OFF point (D)
001: Cool = D+2°C, Heat = D-2°C
002: Cool = D+4°C, Heat = D-4°C
003: Cool = D-2°C, Heat = D+2°C
04
Thermostat OFF
point adjustment
004: Cool = D-4°C, Heat = D+4°C

000: Clear address
06 Outdoor unit address
001 – 199: Address 1 - Address 199

Note 1) Mark
 in the column of the “Individual setting” shows a setting item individually made for each connected
indoor unit.
Note 2) “R” represents remote control and I “indoor unit”.
Note 3) Start the setting from the setting value 000.
17.6.1 Night Time Low Noise
• This control turns down outdoor unit operation noise by limiting compressor and outdoor fan speed.
Setting Value Description Remark
000 Not set Normal Noise Level
001 Level 1 Low Noise Level
002 Level 2 Lower Noise Level
003 Level 3 Lowest Noise Level
• Ensure current time is set correctly at remote control.
• To enable Night Time Low Noise:
o Press SET button (2) to enter local setting mode
o Press Temperature Up / Down button to select Mode No. 2
o Press Timer Up / Down button to select 001, 002 or 003 for the noise level.
o Press Timer SELECT button and then press Timer Up / Down button to set Night time low noise OFF time.
o Press Timer SET button (1) to confirm the OFF time and continue set Night time low noise ON time.
o Press Timer Up / Down button to set the ON time for Night Time Low Noise.
o Press Timer SET button (1) to confirm the ON time.
o After 2 seconds, exits from local setting mode.