14
Gas side mm (inch) 12.70 (1/2) 12.70 (1/2) 12.70 (1/2)
Diameter
Liquid side mm (inch) 6.35 (1/4) 6.35 (1/4) 6.35 (1/4)
Piping
Max Length m (ft) 15.0 (49.20) 15.0 (49.20) 15.0 (49.20)
External diameter mm 16 16 16
Drain hose
Length mm 650 650 650
Fin material Aluminium (Pre Coat) Aluminium (Pre Coat) Aluminium (Pre Coat)
Fin Type Slit Fin Slit Fin Slit Fin
Row x Stage x FPI 2 x 15 x 21 2 x 15 x 21 2 x 15 x 21
Indoor Heat
Exchanger
Size (W x H x L) mm 610.0 x 315.0 x 25.4 610.0 x 315.0 x 25.4 610.0 x 315.0 x 25.4
Material Polypropylene Polypropylene Polypropylene
Air Filter
Type One-Touch One-Touch One-Touch
Power Supply Indoor Power Supply Indoor Power Supply Indoor Power Supply
Length m (ft) - - -
Power cord
Core x Diameter mm
2
- - -
Thermostat Electronic Control Electronic Control Electronic Control
Maximum °C 32 32 32
Cool
Minimum °C 21 21 21
Maximum °C 27 27 27
Indoor Operation
Range
Heat
Minimum °C 16 16 16
1. Cooling capacities are based on indoor temperature of 27°C Dry Bulb (80.6°F Dry Bulb), 19.0°C Wet Bulb (66.2°F Wet Bulb) and outdoor air
temperature of 35°C Dry Bulb (95°F Dry Bulb), 24°C Wet Bulb (75.2°F Wet Bulb).
2. Heating capacities are based on indoor temperature of 20°C Dry Bulb (68.0°F Dry Bulb) and outdoor air temperature of 7°C Dry Bulb (44.6°F
Dry Bulb), 6°C Wet Bulb (42.8°F Wet Bulb).
3. Heating low temperature capacity, input power and COP measured at 230V, indoor temperature 20°C, outdoor 2/1°C.
4. Heating extreme low temperature capacity, input power and COP measured at 230V, indoor temperature 20°C, outdoor -7/-8°C.
5. Specifications are subjected to change without prior notice for future improvement.
To Next Page
Loading...
