Error Code Diagnosis Contents Description of error Automatic FL Display Remarks
H15 CD OPEN SW
Abnormal
During normal operation
CD OPEN SW ON fail to be
detected with 4 sec. Error
No. shall be clear by force
or during cold start.
For CD unit (For Traverse).
Press [
] on main unit for next
error.
F26 Communication
between CD servo
LSI and micro-p
abnormal.
CD function DTMS
command, after system
setting, If SENSE = ´L´
cannot be detected.
Memory shall contain F26
code. After Power on, CD
function shall continue,
error display shall be "NO
DISC". Error No. shall be
clear by force or cold start.
For CD unit (For Traverse).
Press [
] on main unit for next
error.
F61 POWER AMP IC
output abnormal.
During normal operation, if
DCDET becomes "L",
normal POWER OFF
process shall not be
executed, PCONT shall be
switched to "L"
immediately. "GOODBYE"
shall not be display but the
error display F61 is
displayed instead. 2
seconds after the F61
displayed, ECONO shall be
set to "L" and FL display
shall be turned off. The
error content shall be
memorized when the
abnormality occurs and can
be display in the C-mecha
self-diagnostic mode
described later.
For Power Supply Related Error
Detection.
Press [
] on main unit for next
error.
20
SA-PM45E / SA-PM45EG / SA-PM45EE
To Next Page
Loading...
