Panasonic SA-PM45E - Disassembly of Side Panel (L; R); Disassembly of Top Cabinet Unit; Disassembly of Deck Mechanism and Tape Eject P.C.B

9.4. Disassembly of Side Panel (L /
R)
· Disassembly of Side Panel (R)
Step 1: Remove 4 screws.
Step 2 : Remove 1 screw.
Step 3 : Remove the Side Panel (R) as arrow shown.
· Disassembly of Side Panel (L)
Step 4: Remove 4 screws.
Step 5 : Remove 1 screw.
Step 6 : Remove the Side Panel (L) as arrow shown.
9.5. Disassembly of Top Cabinet
Unit
· Follow the (Step 1) - (Step 6) of Item 9.4.
Step 1 : Lift up the top cabinet as arrow shown.
Note: Be careful of the catches area.
Step 2 : Disconnect FFC cable (CN804).
Step 3 : Remove Top Cabinet Unit.
9.6. Disassembly of Deck
Mechanism and Tape Eject
P.C.B
· Follow the (Step 1) - (Step 6) of Item 9.4.
· Follow the (Step 1) - (Step 3) of Item 9.5.
· Diasssembly of Tape Eject P.C.B
24
SA-PM45E / SA-PM45EG / SA-PM45EE