Panasonic SA-PM45PC - Voltage Measurement and Waveform Charts; Voltage Measurement by PCB

11 Voltage Measurement & Waveform Chart
Note:
· Indicated voltage values are the standard values for the unit measured by the DC electronic circuit tester (high-impedance)
with the chassis taken as standard.
Therefore, there may exist some errors in the voltage values, depending on the internal impedance of the DC circuit tester.
· Circuit voltage and waveform described herein shall be regarded as reference information when probing defect point
because it may differ from actual measuring value due to difference of Measuring instrument and its measuring condition
and product itself.
11.1. Voltage Measurement
11.1.1. CD SERVO P.C.B
37
SA-PM45PC
Ref No.
MODE 1 2 3 4 567891011121314151617181920
CD PLA
Y
000 00000000000000003.2
STANDBY 0 0 0 0 0000000000000000
Ref No.
MODE 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40
CD PLA
Y
1.6 0 1.6 1.6 1.8 0 3.2 1.5 3.2 3.2 0 1.6 1.6 0 0 1.9 1.9 0 1.7 1.7
STANDBY 0 0 0 0 0000000000000000
Ref No.
MODE 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60
CD PLA
Y
0.2 2.4 1.7 1.9 1 0 3.2 1.2 0 1.2 1.6 1.6 0.9 1.4 1.5 1.5 0 3.2 0 0
STANDBY 0 0 0 0 0000000000000000
Ref No.
MODE 61 62 63 64 65 66 67 68 69 70 71 72 73 74 75 76 77 78 79 80
CD PLA
Y
3.2000 003332.903.201.601.63.203.21.6
STANDBY 0 0 0 0 0000000000000000
Ref No.
MODE 81 82 83 84 85 86 87 88 89 90 91 92 93 94 95 96 97 98 99 100
CD PLA
Y
1.61.600000000003.20000000
STANDBY 0 0 0 0 0000000000000000
Ref No.
MODE 1 2 3 4 567891011121314151617181920
CD PLA
Y
1.601.600000001.73.23.23.22.83.83.23.207.1
STANDBY 0 0 0 0 0000000000000000
Ref No.
MODE 21 22 23 24 25 26 27 28 29 30
CD PLA
Y
0 0 0 0 7.1 1.6 1.6 1.6 0 0
STANDBY 0 0 0 0 000000
Ref No.
MODE E C B
CD PLA
Y
3.1 2 2.4
STANDBY 0 0.1 0
CD SERVO P.C.B
IC7001
IC7001
IC7001
IC7001
IC7001
IC7002
IC7002
SA-PM45PC CD SERVO P.C.B
Q7601