Panasonic SA-PM45PC - PCB and Component Disassembly

Step 4 : Repeat Step 1 but rotate the gear tools in anti-
clockwiser
9.7. Disassembly of Front Panel
· Follow the (Step 1) - (Step 6) of Item 9.4.
· Follow the (Step 1) of Item 9.5.
· Follow the (Step 1) - (Step 6) of Item 9.6.
Step 1 : Detach cable (CN802, CN900B and CN901B).
Step 2 : Release 2 catches.
Step 3 : Release the claw at the bottom cabinet and remove the
Front Panel as arrow shown.
9.8. Disassembly of USB P.C.B
· Follow the (Step 1) - (Step 6) of Item 9.4.
· Follow the (Step 1) of Item 9.5.
· Follow the (Step 1) - (Step 6) of Item 9.6.
· Follow the (Step 1) - (Step 3) of Item 9.7.
Step 1 : Remove 2 screws.
Step 2 : Remove the USB Ornament.
23
SA-PM45PC