Panasonic TH-103PF12E - Removal of HL-Board; Removal of H5-Board; Removal of DS-Board

27
TH-103PF12E
9.5. Removal of HL-Board
1. Remove 4 screws (F) and then remove the HL Terminal
Block.
2. Remove 4 screws (G).
3. Remove 2 screws (H) and then remove HL-Board.
9.6. Removal of H5-Board
1. Remove 2 screws and then remove H5-Board Block.
2. Disconnect the connector (H51).
3. Remove 2 screws (J).
4. Remove 1 screw (K) and then remove H5-Board.
Note: when fixing H5-Board
• Screw on 1 screw (K) firstly.
9.7. Removal of DS-Board
1. Remove the HL Terminal Block and the HDE Terminal
Block.
(Refer to Removal of HL-Board and HDE-Board)
2. Remove H5-Board Block.
(Refer to Removal of H5-Board)
3. Remove 6 screws and then remove the Slot Case.