Panasonic TH-103PF12E - Removal of P-Board (MAIN_2); Removal of P-Board (SUB); Removal of S1-Board and V2-Board

30
TH-103PF12E
9.13. Removal of P-Board (MAIN_2)
1. Disconnect the connectors (CM1, CM2, CM3, CM4, P6,
P11, P35).
2. Remove 10 screws and then remove P-Board (MAIN_2).
9.14. Removal of P-Board (SUB)
1. Disconnect the connectors (CS1, CS2, CS3, CS4, CS5,
CS6, CS7, CS8, CS9, P7, P9, P25, P34).
2. Remove 9 screws and then remove P-Board (SUB).
9.15. Removal of S1-Board and V2-
Board
1. Remove 2 screws ( ).
2. Remove 2 screws ( ) and then slide the Side Power Unit
upward.
3. Remove the Side Power Unit.
9.15.1. Removal of S1-Board
1. Remove 2 screws (L) and then remove the Power Button
Bracket.
2. Remove 1 screw (M).
3. Disconnect the connector (S34) and then remove S1-
Board.
4. Remove 2 hooks and then remove the Power Button and
Power Button Spring.