Panasonic TH-103PF12E - Removal of C2-Board (Lower); Removal of C3-Board (Lower); Removal of C4-Board (Lower)

40
TH-103PF12E
9.31. Removal of C2-Board (lower)
1. Remove the Reinforcement Angle (lower_left).
(Refer to Removal of SS3-Board)
2. Remove the flexible cables from the connectors (C20,
C21).
3. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA3, CA4, CA5).
4. Remove 6 screws ( ) and then remove C2-Board (lower).
9.32. Removal of C3-Board (lower)
1. Remove 4 screws and then remove the Rear Cover
Angles (H).
2. Remove 3 screws ( ).
3. Remove 2 screws ( ) and then remove the Rear Cover
Angle (lower_center).
4. Remove 2 screws ( ).
5. Remove 2 screws ( ) and then remove the Reinforce-
ment Angle (lower_center).
6. Remove the flexible cables from the connectors (C30,
C31, C32).
7. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA6, CA7, CA8).
8. Remove 6 screws ( ) and then remove C3-Board (lower).
9.33. Removal of C4-Board (lower)