45
TH-103PF12E
Note: when Cabinet or Front Glass is exchanged
• You need new AL Tape kit when you exchange the Cab-
inet or Front Glass.
Note: when Cabinet is exchanged
• Paste the felts and Gaskets in order along each Fixed
Angles (left, right, upper, lower).
• Make sure the felts do not protrude from the edge of the
cabinet.
Note
• The felts are parts which cannot be recycled. Please use
the new article when you exchange the Cabinet.
9.38. Removal of Plasma Display
Panel
The C1 (upper, lower), C2 (upper, lower), C3 (upper, lower),
C4 (upper, lower), C5 (upper, lower), C6 (upper, lower), SS,
SS2, SS3, SC, SU, SM, SD Boards, and flexible cables
between D-C Boards and D-SC Boards, are connected with
the Plasma Display Panel for the repair.
1. Remove the Rear Covers.
(Refer to Removal of Rear Cover)
2. Disconnect the connectors (DS15, P34).
To Next Page
Loading...
