Panasonic TH-103PF12E

31
TH-103PF12E
9.15.2. Removal of V2-Board
1. Remove 4 screw (N) and then remove the Side Power
Cover.
2. Disconnect the connector (V15) and then remove V2-
Board.
3. Remove 2 hooks and then remove the 5 Range Button
from V2-Board.
9.16. Removal of SU-Board
1. Remove the Side Angle (R).
(Refer to Removal of the Side Angle (R))
2. Remove 3 screws ( ).
3. Remove 3 screws ( ) and then remove the Reinforce-
ment Angle (upper_right).
4. Disconnect the Fan relay connectors.
5. Remove 4 screws and then remove the Fan Block (2, 3).
6. Remove 1 screw ( ).
7. Remove 4 screws ( ) and then remove the Side M16
Block.
8. Remove the Duct Barrier E and Duct Barrier F.
9. Remove the flexible cables from the connectors (SU1,
SU2, SU3, SU4, SU11).