Panasonic TH-103PF12E - Removal of SS2-Board

34
TH-103PF12E
1. Remove SU-Board.
(Refer to Removal of SU-Board)
2. Remove SD-Board.
(Refer to Removal of SD-Board)
3. Disconnect the connectors (SM41, SM42, SM46).
4. Remove 6 screws ( ).
5. Remove 4 screws ( ) and then turn over SM-Board to the
left.
Note:
Do not damage the Flexible Cables of SM-Board, and
the parts on SC-Board.
6. Disconnect the connector (SC2).
7. Remove the flexible cable from the connector (SC20).
8. Remove 9 screws and then remove SC-Board.
9.20. Removal of SS2-Board
1. Remove the Side Angle (L).
(Refer to Removal of the Side Angle (L))
2. Disconnect the Fan relay connector.
3. Remove 3 screws and then remove the Fan Block (5).
4. Remove 4 screws ( ).
5. Remove 2 screws ( ) and then remove the Reinforce-
ment Angle (upper_left).