Panasonic TH-103PF12E - Removal of C3-Board (Upper); Removal of C4-Board (Upper)

38
TH-103PF12E
9.26. Removal of C3-Board (upper)
1. Remove the Eye Bolt (center).
2. Remove 3 screws ( ).
3. Remove 2 screws ( ) and then remove the Rear Cover
Angle (upper_center).
4. Remove the Fan Block (4).
(Refer to Removal of Fan)
5. Remove 2 screws ( ).
6. Remove 2 screws ( ) and then remove the Reinforce-
ment Angle (upper_center).
7. Remove the flexible cables from the connectors (C30,
C31, C32).
8. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA6, CA7, CA8).
9. Remove 6 screws ( ) and then remove C3-Board
(upper).
9.27. Removal of C4-Board (upper)
1. Remove the Reinforcement Angle (upper_center).
(Refer to Removal of C3-Board (upper))
2. Remove the flexible cables from the connectors (C40,
C41, C42).
3. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA9, CA10, CA11).
4. Remove 6 screws ( ) and then remove C4-Board
(upper).