Panasonic TH-103PF12E - Removal of C1-Board (Upper); Removal of C2-Board (Upper)

37
TH-103PF12E
4. Reassemble the Fans in reverse order.
5. Stick the Fan Sponge around the Fan.
Note:
The Fan Sponge is not re-usable.
Please use a new one when Fan exchange.
9.24. Removal of C1-Board (upper)
1. Remove the Reinforcement Angle (upper_right).
(Refer to Removal of SU-Board)
2. Remove the flexible cable from the connector (C11).
3. Remove 4 screws ( ) and then remove the flexible
cables from the connectors (CA1, CA2).
4. Remove 4 screws ( ) and then remove C1-Board
(upper).
9.25. Removal of C2-Board (upper)
1. Remove the Reinforcement Angle (upper_right).
(Refer to Removal of SU-Board)
2. Remove the flexible cables from the connectors (C20,
C21).
3. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA3, CA4, CA5).
4. Remove 6 screws ( ) and then remove C2-Board
(upper).