Panasonic TH-103PF12E - Removal of C5-Board (Upper); Removal of C6-Board (Upper); Removal of C1-Board (Lower)

39
TH-103PF12E
9.28. Removal of C5-Board (upper)
1. Remove the Reinforcement Angle (upper_left).
(Refer to Removal of SS2-Board)
2. Disconnect the connector (C55).
3. Remove the flexible cables from the connectors (C50,
C51).
4. Remove 6 screws ( ) and then remove the flexible
cables from the connectors (CA12, CA13, CA14).
5. Remove 6 screws ( ) and then remove C5-Board
(upper).
9.29. Removal of C6-Board (upper)
1. Remove the Reinforcement Angle (upper_left).
(Refer to Removal of SS2-Board)
2. Remove the flexible cable from the connector (C61).
3. Remove 4 screws ( ) and then remove the flexible
cables from the connectors (CA15, CA16).
4. Remove 4 screws ( ) and then remove C6-Board
(upper).
9.30. Removal of C1-Board (lower)
1. Remove the Reinforcement Angle (lower_left).
(Refer to Removal of SS3-Board)
2. Remove the flexible cable from the connector (C11).
3. Remove 4 screws ( ) and then remove the flexible
cables from the connectors (CA1, CA2).
4. Remove 4 screws ( ) and then remove C1-Board (lower).